1. SNMP uses UDP Packets on port
a. 161<-------
b. 261
c. 361
2. There are ___ commands in the SNMP protocol.
a. 3
b. 4<-------
c. 5
3. The data structure used by SNMP is the
a. MIB<------
b. MOB
c. MAB
Q1. The structure used by the SNMP is the ______.
a) MSB
b) MIB
c) MIS
Ans. (b)
Q2. WIN/NT 4 supports which of the four MIBs?
a) GET_NEXT MIB
b) Internet MIB II
c) DHCP MIB
d) WINS MIB II
e) LAN Manager MIB II
f) WINS MIB
Ans. (b,c,e, & f)
Q3. The disk objects (logical & physical disk) cannot
report any information unless you turn ON _______.
a) Disk performance option
b) Disk Administrator tool
c) Disk performance monitoring
d) Diskperf
Ans. (c)
1. SMNP stands
for_____________________________________________.
A. Standard Network Management Protocol
B. Simple Network Management Principle
C. Simple Network Management Protocol
D. Simple Network Management Process
(Answer C, Page 480)
2. The following command can be used with the SNMPUTIL command
(choose all that apply)
A. get
B. getnext
C. walk
D. trap
(Answer A, B, & C, Page 486)
1. Windows NT supports which of the following 4 MIBs.
a. Internet MIB II *
b.LAN Manager MIB II *
c. DHCP MIB *
d. WINS MIB *
e. DNS MIB
2.The following statements are True about MIBs EXCEPT!
a.MIBs are broken down in a hierarchical manner.
b.management information base is the protocol of simple network management
protocol
c. MIBs were started by the ISO
d. unfortunately the MIB data structure has trouble being addressed over the
network *
3. Which of the first few steps is NOT one to take when
creating a log file?
a. select the items you want to log from your system
b. Choose edit, Add to log.
c. enter the log file IP address and name *
d. Choose View, LOG from the Performance Monitor menu
e. click cancel when everything that you want to log is listed
f. Choose options, Log from the menu.
1) Which is a SNMP protocol command?
a) Taps
b) Traps *
c) Maps
d) Caps
2) Which is not a SNMPUTIL command?
a) get
b) getnext
c) walk
d) run *
The command that comes from the Manager, and tells the Agent
to return the current value for a particular setting.
a. Get **
b. Get next
c. Get current
d. Trap
The Command that tells the Agent to return the value for the next setting that it has.
a. Get
b. Get next **
c. Get current
d. Trap
______________is Microsoft-specific, it can manage Microsoft MIB with 70 objects.
a. internet MIB II
b. Lan Manager MIB II
c. DHCP MIB
d. WINS MIB **
1. Name the four commands in the SNMP Protocol
GET*, GET-NEXT*, SET*, TRAP*
2. What does SNMP stand for?
Simple Network Management Protocol*
3. What are the two main peices of SNMP?
SNMP Managers and SNMP Agents
4. What sets the security for SNMP?
Communities*
1. _________ indicates an alert condition and is intended to alert the Manager to the condition.
A. Set
B. Catch
C. Packet Sniffer
D. Trap **
2. Management stations and the Agents must share the same _____ before they can communicate.
A. bread
B. community name **
C. security clearance
D. host
E. files
3. Accept SNMP packets from any host:
A. enables any system with Management software to access information about the system.
B. enables any system that uses proper community name entered to access information about the system.
C. enables any system with Management software that uses proper community name entered to access information about the system. **
D. enables any system with Management software that uses proper community name entered to access information about the system if proper administrative privileges apply.
1. What is the command used to test the SNMP
Installation ?
a. SNMPUTIL ****
Net use
getnext
UTIL
2. SNMP runs on which UDP Port
a. Port 137
Port 124
Port 161 ****
Port 160
3. TCP/IP counters for the Performance Monitor are not
installed unless the SNMP Agent is installed ?
a. TRUE ****
FALSE
1. What does SNMP stand for?
Simple Network Management Protocol
2.What does SNMP agent do?
It is the part of the protocol that sits in the device and respond to the request of the management software.
3.What is the performance monitor used for?
Checking the performance of your system
What are the four commands used in the SNMP protocol?
* GET; GET-NEXT; SET; TRAP
Where does SNMP store values returned to the SNMP Managers?
a. IMB
b* MIB
c. SNMBdb
d. dbSNMB
1. SMNP stands for______.
A. Standard Network Management Protocol
B. Simple Network Management Principle
C. Simple Network Management Protocol *
D. Simple Network Management Process
2. Management stations and the Agents must share the same _____ before they
can communicate.
A. bread
B. community name **
C. security clearance
D. host
E. files
3. TCP/IP counters for the Performance Monitor are not installed unless the SNMP Agent is installed ?
a. TRUE *
B. FALSE